(1) EV Controller must be connected to the housing's bulkhead with a #4103.51 or #4103.52 sync cord. The housing's TTL conversion circuitry cannot be used when an EV Controller is attached--manual exposure only.

(2) TTL SubStrobe models 50, 100A, and 200 built before June of 2001 may require sync circuit update to operate with digital cameras. If the strobe locks up the camera after taking one picture, modification is required. Dual strobe installations are most likely to require update. Older SubStrobe models MV, Ai, and 400 cannot be updated.

(3) Replacement of permanent port "O" ring usually not required unless port has been removed. Removable dSLR housing port "O" rings are subject to replacement.

(4) Ikelite DS SubStrobes only. Strobes built before September 2004 require update.

(5) #4103.51 and #4103.52 Digital Sync Cords are identifiable with their blue band.

(6) Requires #9306.80 optional adapter for the Inon UWL-105AD bayonet style lenses. Requires #9306.81 adapter for the 67mm threaded Ikelite W-20, Epoque, and Inon UWL-100 lenses.

(7) Standard flat port provides full zoom capabilities, but length of lens precludes any advantage to the addition of external wide-angle lenses. Optional #9305.92 Flat Port for G-7 and G-9 Housings slightly limits camera's zoom range, but allows for the effective use of 67mm threaded external lenses.